781-273-2773     
info@stevesdepot.com     
 
Digitrax
Command Stations & Power Boosters
Model Description List Steve's Add Cart
Integrated Command Station & 8 Amp Booster
DCS200 1 in stock

DCS200 8 Amp DCC Command Station & Booster

The DCS200 is the same combined command station and booster included in the Super Chief Xtra 8 Amp starter set.

Features

  • Full LocoNet Capabilities for easy plug 'n play installation and system expansion
  • Run up to 120 locos and 120 throttles in command station mode
  • Provides additional power to run more trains in booster mode
  • Can be used as an Intelligent Auto Reversing Booster
  • Use with any LocoNet throttle
  • Read/Write programming with CV readback
  • Two DCC outputs so you can run your trains and program at the same time
  • Built in 8 Amp Digital Command Control Booster to give you maximum power
  • Many command station options are user customizable
  • Auto resetting over temperature & short circuit protection
  • User selectable multi-scale operation for N, HO, and large-scale layouts
  • Track Status indicator shows voltage and signal type (DCC or "Zero Stretch" Analog Signal for conventional operation)
  • Stabilized Track Drive Output
  • Over Voltage Protected
  • Auto shutdown if command control drive signal is lost so that the layout will not convert to DC operation if a cable or connection is broken. The trains won't just "take-off" if they are not getting the DCC signal
  • Complies with FCC Part 15, Class B RFI Requirements
  • DCC Compatible

305.00 239.95
8 Amp Boosters
DB200PLUS 1 in stock

DB200 PLUS 8 Amp DCC Booster

DB200 PLUS 8 Amp Booster is a booster only, it must be used in conjunction with a command station to work.

Features

  • 8 Amp AutoReversing DCC Booster ( No command station ability)
  • Provides additional power to run more trains
  • Can be used as an Auto Reversing Booster
  • Auto resetting over temperature & short circuit protection
  • User selectable multi-scale operation for N, HO, and large-scale layouts
  • LocoNet for easy plug 'n play installation and system expansion
  • Track Status indicator shows voltage and signal type (DCC or "Zero Stretch" Analog Signal for conventional operation)
  • Stabilized Track Drive Output
  • Over Voltage Protected
  • Auto shutdown if command control drive signal is lost so that the layout will not convert to DC operation if a cable or connection is broken. The trains won't just "take-off" if they are not getting the DCC signal
  • Complies with FCC Part 15, Class B RFI Requirements
  • DCC Compatible

199.99 159.99
DB200OPTO 1 in stock

DB200 OPTO 8 Amp DCC Booster

DB200 OPTO 8 Amp Booster is a booster only, it must be used in conjunction with a command station to work.

The booster is opto-isolated for layouts with Common Rail Wiring.

All Features of the DB200 PLUS, and...

  • Opto-Isolated for layouts with Common Rail Wiring

199.99 159.99