781-273-2773     
info@stevesdepot.com     
 
Digitrax
Signaling
Model Description List Steve's Add Cart
SE8C SE8C Signal Decoder

SE8C Plug 'N Play Signal Decoder make it easy to add prototypical signaling to your layout.

The SE8C can drive as many as 32 signal heads with many popular LED signal types.

It can also be used to control up to 8 slow motion turnout machines as either turnout control or control for semaphore type signals.

Easy modular Plug 'N Play and additional accessories make it simple to add signaling to your layout.

Features

  • Control signals manually on your layout with a Loconet Throttle and Command Station
  • Automate control with detection and compatible computer software
  • Drives as many as 32 signal heads of any popular LED type
  • Built in current limiting resistors for setting brightness of LEDs
  • Drives up to 8 semaphore signals using slow motion turnout machines
  • Alternately can be used as stationary decoder to control 8 slow motion turnouts
  • Simple modular Plug 'N Play wiring system
  • Each signal driver cable drives 4 heads
  • Includes a sample Signal Driver Cable and Test Signal Mast
  • Provides 8 inputs for 8 control lines for local turnout control
  • Provides 8 inputs occupancy sensor links
  • For use with DC or DCC controlled layouts
  • Transponding is not necessary to implement signaling

Note: A computer and third party software are necessary to realize the full feature potential of the SE8C.


125.00 99.95
SDCK SDCK Signal Driver Cable Kit

Materials for making 2 Signal Driver Cables for SE8C. Includes 30Őof 10-wire Signal Driver ribbon cable & 8 10-Pin sockets.

Use this kit to make signal driver cables to connect your SE8c to the signals on the railroad. Make the cables any length that you desire and place the signal connectors at the locations where you will install signals. All the signals are carried neatly in the ribbon cable so you can avoid a "birdŐs nest" under your layout.


20.00 15.95
SMBK SMBK Signal Mast Base Kit

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.


15.00 11.99
SMHK SMHK Signal Mounting Hardware Kit

Under layout mounting hardware for Signal Driver Cables and their sockets. 6 metal signal straps and 6 signal spacers. These handy bits of hardware hold your signal plugs at just the right distance from the layout to make it easy to plug in your signals.


10.00 7.99
TSMK TSMK Terminal Strip Mounting Kit

Includes 2 terminal strip boards with resistors for easy installation. Each terminal strip board can handle from 1 to 4 signal heads. Use this interface instead of Signal Mast Bases when you already have signals installed on your layout. Simply run the wires from your existing signals to the terminals on the TSMK and plug your Signal Driver Cable in on the plug provided.


15.00 11.99