BigSound PB11 Features

16-bit Sound Reproduction	3.6V NiMH Rechargeable Battery	DCC Decoder Built-In*	Advanced Circuit Protection
Extensive Sound Library	Built-In Battery Charger	Simple Remote Programming	Opto Isolation Not Necessary
Polyphonic Sound Integration	3-Volt Low-Speed Operation	5 External Control Triggers	Lineout for External Amplification
3 Watt Audio Amplifier	BigBoost Built-In	Manual and Automatic Operation	Twice the Memory of the 2K2
* IMPORTANT INFORMATION: Although the PB11 board has a built-in DCC decoder, it is used for triggering sound effects from function keys but DOES NOT have the ability to run the locomotive motor!

BigSound PB11 Complete Kit Contents

All BigSound PB11 Complete Kits include the BigSound PB11 sound board, a locomotive-specific speaker (if needed) and rechargeable battery, 2.5mm computer interface jack, volume switch and documentation (user manual, installation instructions, wiring diagrams).

As appropriate or required for a particular locomotive installation, kits may also contain reed switches, triggering magnets, wiring and specialized documentation..

BigSound PB11 Additional Information

The BigSound PB11 builds upon and includes all features of previous Phoenix sound systems. It differs from the BigSound P8 primarily in that it can operate on DCC, RC/battery and DC power packs. The P8 can run on DCC or RC/battery, but not DC power packs.

Sound features can be controlled by DCC throttle function keys when operating on DCC. For additional (or non-DCC) sound feature control the BigSound PB11 has 5 external inputs that can be triggered by reed switches or other remote control trigger outputs.

The BigSound PB11 is 100% configurable from most Windows personal computers using the simple, graphical computer interface kit (sold separately).