BigSound PB11 Electrical Ratings & Specifications
|Power & Control:
||variable DC, DCC, RC/battery
||3 to 30
||2.56 x 0.93 x 0.50 inches
||65.0 x 23.6 x 12.7 mm
||3 Watt, 4 Ohm load
||5 (11 with P5T accessory)
BigSound PB11 Features
BigSound PB11 Complete Kit Contents
|16-bit Sound Reproduction
||3.6V NiMH Rechargeable Battery
||DCC Decoder Built-In*
||Advanced Circuit Protection
|Extensive Sound Library
||Built-In Battery Charger
||Simple Remote Programming
||Opto Isolation Not Necessary
|Polyphonic Sound Integration
||3-Volt Low-Speed Operation
||5 External Control Triggers
||Lineout for External Amplification
|3 Watt Audio Amplifier
||Manual and Automatic Operation
||Twice the Memory of the 2K2
* IMPORTANT INFORMATION: Although the PB11 board has a built-in DCC decoder, it is used for triggering sound effects from function keys but DOES NOT have the ability to run the locomotive motor!
All BigSound PB11 Complete Kits include the BigSound PB11 sound board, a locomotive-specific speaker (if needed) and rechargeable battery, 2.5mm computer interface jack, volume switch and documentation (user manual, installation instructions, wiring diagrams).
As appropriate or required for a particular locomotive installation, kits may also contain reed switches, triggering magnets, wiring and specialized documentation..
BigSound PB11 Additional Information
The BigSound PB11 builds upon and includes all features of previous Phoenix sound systems.
It differs from the BigSound P8 primarily in that it can operate on DCC, RC/battery and DC power packs.
The P8 can run on DCC or RC/battery, but not DC power packs.
Sound features can be controlled by DCC throttle function keys when operating on DCC.
For additional (or non-DCC) sound feature control the BigSound PB11 has 5 external inputs that can be triggered by reed switches or other remote control trigger outputs.
The BigSound PB11 is 100% configurable from most Windows personal computers using the simple, graphical computer interface kit (sold separately).