781-273-2773     
info@stevesdepot.com     
 
TCS
N Scale Decoders for Kato
Model Description List Steve's Add Cart
K0D8 Series
1332 3 in stock

K0D8-A

Four of the functions outputs (F1-F4) have onboard resistors for LED's and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 8 lighting @ 80mA including 2 LEDs installed
Interface: replacement board
Locomotives: Kato: ALCO PA, E8A, E9A, P42 Genesis
   
39.95 31.95
1333 2 in stock

K0D8-B

Four of the functions outputs (F1-F4) have onboard resistors for LED's and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 8 lighting @ 80mA including 1 LED installed
Interface: replacement board
Locomotives: Kato: F3A, F7A
   
39.95 31.95
1338 1 in stock

K0D8-C

Four of the functions outputs (F1-F4) have onboard resistors for LED's and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 8 lighting @ 80mA including 2 LEDs installed
Interface: replacement board
Locomotives: Kato: F40PH
   
39.95 31.95
1339 2 in stock

K0D8-D

This decoder has NO ONBOARD LED's because it is designed for locomotives with no lights (B Units)

Four of the functions outputs (F1-F4) have onboard resistors for LED's and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 8 lighting @ 80mA
Interface: replacement board
Locomotives: Kato: E9B, F3B, F7A, F7B, PB1
   
39.95 31.95
1481 2 in stock

K0D8-E

This decoder has 8 functions with built-in onboard resistor for LED's, 1 onboard superbright, Golden White LED with medium length leads.

Note: Four of the functions (F1-F4) have onboard resistors for LED's and 1.5v bulbs. The remaining two hardwire functions (F5-F6) output at 12v and will need external resistors if you plan to use LED's or 1.5v bulbs.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Quiet Drive
Function Outputs: 8 lighting @ 80mA
Interface: replacement board
Locomotives: Kato: E5, E6
   
39.95 31.95
Other
1293 2 in stock

K1D4

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 4 lighting @ 80mA including 2 LEDs installed
Interface: replacement board
Locomotives: Kato: SD40, SD70MAC, SD70/75M, C44-9W, AC4400
Athearn: F45
   
39.95 31.95
1318 2 in stock

K1D4-NC

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 4 lighting @ 80mA
Interface: replacement board
Locomotives: Kato: SD70ACe, SD70M, SD40-2, GG1
   
39.95 31.95
1294 1 in stock

K2D4

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 4 lighting @ 80mA including 2 LEDs installed
Interface: replacement board
Locomotives: Kato: RS2, RSC2, SD80/90MAC, EMD 90/43MAC
Walthers: RS2, GP18
   
39.95 31.95
1295 2 in stock

K3D3

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 4 lighting @ 80mA
Interface: replacement board
Locomotives: Kato: NW2
   
39.95 31.95
1414 1 in stock

K4D6 An accessory lighting kit, the K4-LK, can be added to control the strobe and rear light of the Kato N-Scale MP36ph Metra.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Function Outputs: 6 lighting @ 80mA
Interface: replacement board
Locomotives: Kato: MP36ph Metra
   
39.95 31.95
1415 1 in stock

K4-LK

This is a lighting kit for the K4D6 decoder and is used to control the strobe and rear light of the Kato N-Scale MP36ph Metra.

15.95 12.75
1489 1 in stock

K5D7

The K5D7 is a drop-in decoder for the upcoming Kato N Scale F40PH. This decoder has an onboard LED to operate the red marker lights. Also includes a forward and reverse light. Also has 4 extra functions for extra lighting options.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Quiet Drive
Function Outputs: 6 lighting @ 80mA including 2 LEDs installed
Interface: replacement board
Locomotives: Kato: F40PH
   
42.75 34.19
1556 2 in stock

K6D4

The K5D7 is a drop-in decoder for the upcoming Kato N Scale F40PH. This decoder has an onboard LED to operate the red marker lights. Also includes a forward and reverse light. Also has 4 extra functions for extra lighting options.

Amp Rating/Peak: 1.0 / 2.0
Motor Drive: auto-adjusting Back EMF
Quiet Drive
Function Outputs: 4 lighting @ 80mA including 1 LED installed
Interface: replacement board
Locomotives: Kato: FEF
   
42.75 34.19