Phoenix Sound Systems
BigSound P8 Kits for Piko

BigSound P8 Electrical Ratings & Specifications

Power & Control: DCC, RC/battery
Voltage (Range): 9 to 30
Size (Imperial): 2.25 x 0.88 x 0.44 inches
Size (Metric): 57 x 22.23 x 11.11 mm
Audio Amplifier: 6 Watt, 4 Ohm load
Trigger Inputs: 5 (11 with P5T accessory)
BigSound P8 Features

16-bit Sound Reproduction DCC Decoder Built-In* Advanced Circuit Protection Extensive Sound Library
6 Watt Audio Amplifier Simple Remote Programming 5 External Control Triggers All the Effects of the 2K2
* IMPORTANT INFORMATION: Although the P8 board has a built-in DCC decoder, it is used for triggering sound effects from function keys but DOES NOT have the ability to run the locomotive motor!

BigSound P8 Complete Kit Contents

All BigSound P8 Complete Kits include the BigSound P8 sound board, a locomotive-specific speaker (if needed) , 2.5mm computer interface jack, volume switch and documentation (user manual, installation instructions, wiring diagrams).

As appropriate or required for a particular locomotive installation, kits may also contain reed switches, triggering magnets, wiring and specialized documentation..

BigSound P8 Additional Information

The BigSound P8 builds upon and includes all features of previous Phoenix sound systems. It differs from the BigSound PB11 primarily in that it can operate on DCC or RC/battery but not DC power packs. The PB11 can run on DCC, RC/battery and DC power packs.

Sound features can be controlled by DCC throttle function keys when operating on DCC. For additional (or non-DCC) sound feature control the BigSound P8 has 5 external inputs that can be triggered by reed switches or other remote control trigger outputs.

The BigSound P8 is 100% configurable from most Windows personal computers using the simple, graphical computer interface kit (sold separately).

Model Description List Steve's Add Cart
Light Steam
8801-59 Piko 2-6-0 Mogul 195.00 179.95