781-272-0213     
info@stevesdepot.com     
 
Lenz
HO Scale Decoders
Model Description Image Discount Add Cart
Standard+
10231-01 4 in stock

Standard+ MP

Amp Rating/Peak: 1.0 / 1.8
Size (Imperial): 1.00 x 0.61 x 0.13 inches
Size (Metric): 25 x 15.4 x 3.3 mm
Function Outputs: 3 @ 100mA with special lighting effects
Interface: wire harness with 8-pin NMRA plug
Other: RailCom, Back EMF motor control
   
List: 31.00
Discount: 70%

Steve's: 9.30
Silver+

Features common to all Silver+ HO scale decoders:

  • RailCom-able, RailCom function factory-set
  • ABC technology by Lenz
  • High-frequency motor control
  • Total load capacity of function outputs: 500 mA
  • time controlled switching of function outputs (e.g. for coupling)
  • Protected against overload, short circuits and overheating.
  • Support of 2- or 4-digit addresses
  • Double or multiple traction
  • Automatic recognition of digital and analogue operation
  • Shunting
10331-01 1 in stock

Silver+ MP

The Silver+ is the basic model of our powerful decoder equipped with the convenient ABC technology and thermal overload / short-circuit protection.

Amp Rating/Peak: 1.0 / 1.8
Size (Imperial): 0.91 x 0.65 x 0.12 inches
Size (Metric): 23 x 16.5 x 2.7 mm
Function Outputs: 5 @ 500mA with special lighting effects
Interface: wire harness with 8-pin NMRA plug
   
List: 44.27
Discount: 70%

Steve's: 13.28
10321-01 1 in stock

Silver+ 21

The Silver+ 21 is like the Silver+, but equipped with a 21 pin interface plug located on the circuit board and even more space saving due to its 2.5 mm shorter design.

Amp Rating/Peak: 1.0 / 1.8
Size (Imperial): 0.82 x 0.61 x 0.21 inches
Size (Metric): 20.5 x 15.5 x 3.92 mm
Function Outputs: 5 @ 500mA with special lighting effects
Interface: integrated 21-pin plug
   
List: 44.27
Discount: 70%

Steve's: 13.28
10330-01 1 in stock

Silver+ direct

The SILVER+ direct was designed especially for locomotives equipped with an 8 pin NEM652 interface. The decoder pins are located directly on the circuit board so that the decoder can be simply plugged onto the interface. It doesn't get any easier! Thanks to its small dimensions, the decoder can be installed easily in a variety of locomotives.

Amp Rating/Peak: 1.0 / 1.8
Size (Imperial): 0.71 x 0.51 x 0.18 inches
Size (Metric): 19.0 x 13.0 x 3.335 mm
Function Outputs: 5 @ 500mA with special lighting effects
Interface: integrated 8-pin NEM 652 plug
   
List: 46.87
Discount: 70%

Steve's: 14.06
Gold+

Features common to all Gold+ HO scale decoders:

  • RailCom-able, RailCom function factory-set
  • ABC technology by Lenz
  • USP uninterrupted communication between command station and decoder
  • High-frequency motor control
  • Motor continuous current: 1.0 A
  • Five function outputs, load capacity 500 mA each
  • Total load capacity of function outputs: 500 mA
  • Time controlled switching of function outputs (e.g. for coupling)
  • Protected against overload, short circuits and overheating
  • Support of 2- or 4-digit addresses
  • Double or multiple traction
  • Automatic recognition of digital and analogue operation
  • Shunting
10433-01 2 in stock

Gold+ MP

Amp Rating/Peak: 1.0 / 1.8
Size (Imperial): 0.87 x 0.61 x 0.26 inches
Size (Metric): 22 x 15.5 x 6.5 mm
Function Outputs: 5 @ 500mA with special lighting effects
Interface: JST (not in image) to wire harness with 8-pin NMRA plug
   
List: 53.00
Discount: 70%

Steve's: 15.90
Gold+ USP Technology Accessories

Everybody knows this problem: dirty tracks, dead frogs, and interrupted contacts, and the locomotive stops (according to Murphy's Law usually on the least accessible part of the layout ...). That is now a problem of the past. In combination with the locomotive decoders of the GOLD series, the storage modules supply the necessary energy for uninterrupted communication between command station and decoder. This is facilitated by the unique USP technology with which we are again setting standards in model railway electronics.

Very clever with USP by Digital plus

Together with the optional energy storage, the intelligent USP circuit ensures that your locomotive can run even over dirty track sections or dead frogs (the energy storage is installed separately in the vehicle). That means: uninterrupted communication between command station and decoder.

The remarkable USP feature

(compared to a simple capacitor): even if there is no electrical contact between track and locomotive the decoder receives information from the command station as long as the power module supports power to the decoder. Thus, in spite of a dirty, currentless track, commands like change of direction still can be given.

Energy from the storage module is requested only if the USP circuit determines that the track contact has been unintentionally interrupted, i.e. not if the locomotive drives into a stopping section where the voltage has been intentionally interrupted or if the locomotive is taken off the track.


10490 1 in stock

Power1 Storage Module

The energy storage module Power1 was designed for connection to GOLD decoders. This storage unit supplies both the decoder and the locomotive in case of a power interruption on the track (e.g. in case of a dead frog or dirty track).

Its compact design allows installation in many locomotive models.

Size (Imperial): 0.87 x 0.52 x 0.37 inches
Size (Metric): 22 x 13.3 x 9.4 mm
   
List: 65.00
Discount: 70%

Steve's: 19.50