Stationary Decoders

Switching with Digital plus

Digital switching works just like digital driving: Switch decoders receive relevant information via the same two-wire line that feeds the tracks. Having received this information, switch decoders address points and signals as well as lights and LEDs in light signals.

Switch decoders always serve to switch something on or off. Each decoder has several outputs to connect points. Each output has its own address, just like a locomotive decoder. The programming mode is initiated via a push-button. Programming is also possible on the track. Output features can be set individually, depending on how points or signals are used. The period during which an output remains active after activation can be set. This feature is particularly useful for motorised point drives. Another possibility is flashing operation. The flashing frequency is programmable. This means that warning crosses at level crossings do not require separate electronics.

Model Description Discount Add Cart
11100 1 in stock

LS100 Switch Decoder

Four points or signals etc. can be connected to the switch decoder LS100. The maximum load of all power consumers operating simultaneously must not exceed 1.7A. DC is applied to the outputs - remember this when connecting LEDs. The LS100 is equipped with connections that serve, for example, to feed the status of points back to the command station.

See the LA010 Adapter below for use with motorized or EPL drive switches.

Size (Imperial): 4.49 x 2.36 x 0.79 inches
Size (Metric): 114 x 60 x 20 mm
List: 110.00
Discount: 80%

Steve's: 22.00
11010 4 in stock

LA010 Adapter

The adapter LA 010 is required when connecting motorized point or EPL drives to the switch decoder LS100.

Size (Imperial): 0.55 x 1.18 x 0.51 inches
Size (Metric): 14 x 30 x 13 mm
List: 18.73
Discount: 80%

Steve's: 3.74